Door Lock Cylinder Without Key
If you’re in a situation where you can’t find your key, you can follow these simple instructions to change your door lock cylinder. You can do this by unscrewing the lock’s pins. The more you drill, the easier it will be. Next, you should remove the metal shield on the front of the lock. Once you have removed it, you’ll need to remove the two screws that hold the cyclone and the cylinder in place.
If you’ve been trying to change the door lock cylinder on your own for several months, you might want to consider hiring a professional locksmith to help you. They can repair damaged locks with graphite and make extra keys for you on the spot. You might also want to ask if they offer any discounts if you’ve broken the lock or lost your key. This way, you can ensure that you get the exact cylinder for your vehicle.
To change the cylinder, first remove the spindle. You’ll need a flashlight to find the small tab that fits underneath the cylinder. Once you have found it, use the flat-head screwdriver to push it free. If you need to use an Allen wrench, you can insert the new cyan cylinder. Be careful not to over-push the pins because if you don’t, you may permanently damage the lock.
How to Change Door Lock Cylinder Without Key
After the spindle is removed, you can use a drill bit to unlock the cylinder. Use a small flashlight to locate the small tab. Then, you can use a flat-head screwdriver to push the cylinder out of the housing. When you’ve found the new cylindrical cylinder, you can then remove the old one. Ensure that the colored pins match the color code of the old ones.
Once you have located the cylinder, turn it to remove it. You can now replace the cylinder by pressing the two screws in the plug follower and turning the key. Depending on the type of cylindrical cylinder you have, you’ll need to buy a new cylinder. Be sure not to press too hard on the tab as this can damage the lock. A small flashlight can also help you locate the small tab.
Once the cylinder is out, you should carefully remove the faceplate and the set screws that hold it in place. If the set screws are damaged, they will need to be replaced to ensure the cylinder fits snugly. If the set screws are loose, they will need to be tightened as well. To replace the cylinder, you must follow the instructions for reinserting the pins. In case of a mortise cipher cryptic cylinder, you should follow the same steps.